The standard kit, using your spare halyard, topping lift or handy billy.
Consists of:
Two slings, mounting brackets and fixings, snap shackles on lines to attach your dinghy, a bridle with ring, to clip on your lifting system and a float to keep the attachment ring above water and easily retrievable. For boats with a gantry at the stern, the same system can be used but the dinghy is lifted and stowed by running lines through blocks on the gantry.
The only additional cost is for the lines blocks, cleats to hoist your tender, these can be supplied at extra cost.
Each system is tailor made to fit your combination of stern configuration and dinghy but the system can be demounted and fitted to a different boat, with slight alterations.
If you have an external rudder then additional brackets will be needed to extend the slings to clear the rudder, these are available to your requirements at extra cost.
We are available to help with advice at all stages of your installation, we also offer a fitting service in certain areas and are aiming to set up a national network of fitters.
Also available:
Anti chafe strips to reduce any chafe between the webbing and the tender. Mounting brackets to extend the slings to clear the rudder, for boats with protruding rudders. Additional slings and fixings to form a man overboard system or for larger tenders. Handy billy's, blocks, lines and cleats, for hoisting. Lifting slings for outboard motors Stencils for boat name painting.
For more information please click on the links above
or e-mail: info@dinghystow.com
or telephone; UK 01159 605641 or 07860 474366 and ask for Malc
